Ask all of your tech help questions here.

When following instructions to set up voice access, step #2 gives me the error message "Requires permission not exported from uid 10092". Any idea?

It should still work. Repeat all the instructions again if you are still having issues.

How do I access certain part of apps, for example the Smart Zmanim app, on the top, there is the 3 bars on the left and the 2 icons on the right. How do I access those buttons? I have the LG classic flip.

My question is not limited to this app, there are many apps with additional buttons that seem like it can't be accessed?

You can try using the voice access app. That should allow you to access most parts of any app using your voice.

Instructions to install the voice access app is located at https://www.apps4flip.com/apps/

Apps4Flip-Admin Edit instructions on site to ignore error

anonymousflipphone
I'm having an issue too, except I'm getting uid 10102

regarding voice access, I am getting uid 10173 error

I see, we can just ignore the error and continue. Is it possible to say OK google to activate the voice access or do we have to activate/deactivate it manually everytime?

rand01201 it works if you ignore the error?

I tried just completing all steps, voice access still totally unusable 😥

anonymousflipphone
You need to run all the commands, including removing the old voice command.

I did try that already....

I have another problem that on the new waze, Uber, and stratigo apps, the cursor is seen and moves around the screen, but won't actually click on anything, rendering these 3 apps unusable....I have a sonim xp3 flip phone...

I have the LG Classic and I installed the Voice Command - but can't get it to work. Am I supposed to be pushing a button for it to recognize that I'm talking? In the Voice Command settings, Configure Activation Key, I chose a button, but when pushing that button and talking nothing is happening (only the Google bar pops up at the top). Anyone able to help me out with this?

I'm not sure what happened now, but it's not allowing me to even open the Voice Access App. When I click on it from the Launcher it says Turn on Voice Access and when I click OK I get a screen that says unfortunately voice access has stopped. It would be greatly appreciated if someone can assist.

Had a similar problem where the google bar was popping up but nothing else happened. I uninstalled the Vice access app and reinstalled it with all the adb commands (except the last one which uninstalls the existing voice commands, since it was already removed the first time)

Is there an option for Button Mapper for the LG Classic?

On the Kyocera dura Xv and cadence and duraXV extreme you can use button mapper and switchboard etc but the lg exalt and classic flip doesn’t have an accessibility option to enable these apps, is there a way to get accessibility options enabled through adb and somehow ?

I have a Kyocera Cadence that the phone does not charge when plugged in, and instead shows a "Not charging" notification when plugged in, with a message that I should use the cable provided with the phone. I don't have the original cable, and I tried other cables that seem to work fine with other phones
I tried swapping out chargers with varying degrees of success. (battery swapping didn't work for me) Note that when the phone is Powered OFF it seems to charge the battery fine to 100%. Does Anyone have any tips or ideas that may help me?

Phoney check to see if the pins in the phone, that the cable connects to, is messed up. That might be the issue.

The pins all look OK on both items. Any other ideas? I got the phone as new but I think it may be refurbished. Could it be it was replaced incorrectly?

any info?
i set the developer menu OFF on the schok phone, and now i cant reopen it by clicking on the build number, i tried a factory reset, didn't work.

Msing
There is, Check out the apps4flip website for instructions

senderp56
I'm not familiar with that exact phone, but most times once you activate developer options by clicking on build number, there is no need to do it again, it stays in the settings

Techgen these are for voice access did it work also for that apps?

Techgen where?

yk9813 Msing
I would imagine you can use the same commands as for voice access, just replace com.android.cts.apps.accessibility.voiceaccess/com.google.android.apps.accessibility.voiceaccess.JustSpeakService with com.android.cts.switchaccess/ug.air.switchaccess.SwitchIME or ug.air.switchaccess/ug.air.switchaccess.SwitchIME or whatever the package name is, (I'm assuming you already have a switchboard app that works on Exalt, even though I don't think apps4flip put one on their site) @Apps4Flip-Admin would have to confirm this, but it should work.

Techgen wen I try to install it on the classic I got a message app not installed

Switchboard should work if you change the adb commands to activate the switchboards accessibility service.

We have it on our to do list to release an official version and a guide soon.

If anyone here plays around and has the exact commands to activate switchboard, please post it as it would help us release the app faster.

Apps4Flip-Admin the commands is only for after installing but on the LG classic we are unable to install it

Switchboard doesn’t work. Even with these commands. I REALLY WANT IT

Msing If says it on the top of that page (https://kosherappsforflip.wixsite.com/kosherappsforflip/kyocera-candence)
THESE APPS WON'T INSTALL ON THE EXALT

I know but with adb it can work on exalt

Apps4Flip-Admin
The service name of switchboard is ug.air.switchaccess.SwitchAccessibilityService, so assuming that after youre finished with it the package name will be com.android.cts.switchaccess, the commands should be
am startservice com.android.cts.switchaccess/ug.air.switchaccess.SwitchAccessibilityService settings put secure enabled_accessibility_services com.android.cts.switchaccess/ug.air.switchaccess.SwitchAccessibilityService settings put secure accessibility_enabled 1

(I think the ug.air.switchaccess.SwitchIME service I wrote before is a secondary service)
I havent tested it, because i dont have the Exalt

__

yk9813 Msing In order for any app to be able to be installed on the Exalt or Classic the app has to be adjusted first, @Apps4Flip-Admin said theyre working on it for switchboard, but untill you have one that can be installed, none of these commands will help (as you said)

Msing adb commands can only help to enable accessability services after switchboard is installed, but you still need a switchboard .apk that is changed to be compatible with the Exalt/classic, which apps4flip did not put out yet

You guys don’t understand I made my own lg classic flip switchboard I know how to do it I will not reveal secret.

AND I TRIED IT NOT WORKING

Msing Ok, great. I thought you were in the same boat as @yk9813 who said he couldn't install. Yea, its not a good idea to reveal the exploit in public, lest it get into the wrong hands. So try using the commands I just posted above, adjusting of course for your apk

I got it to work

Apps4Flip-Admin maybe you can release the app and we try to help figure out this

Techgen Thanks

Techgen can you also configure the service name for button mapper ?

yk9813 I added it to the to do list

I got the service name for button mapper:
com.android.cts.buttonmapper/a.i
the problem is, is that when i enable button mapper voice access gets disabled
any solutions?

I don't think you can have more then 1 accessibility service active at any given time. You would have to pick between button mapper and voice access

Apps4Flip-Admin button mapper has the same function like voice access ?

boruch thanks

Apps4Flip-Admin boruch I think you can enable two accessability services by sticking a colon ( : ) in between services, such as adb shell settings put secure enabled_accessibility_services package1/service1:package2/service2